UPS Service Canada is not affiliated with Eaton Corporation
Eaton UPS Battery Replacement Canada
OEM-compatible battery replacement for Eaton 9PX, 93PM, 5P, 9SX, BladeUPS, Powerware, and all Eaton UPS models. Minimal downtime, load testing included, eco-compliant disposal Canada-wide.
What a battery test actually measures
Impedance is read on every block and trended against the baseline. One weak block limits the whole string, which is why sets are replaced together.
Eaton UPS Battery Replacement for Every Model
Eaton battery failure is the leading cause of UPS failure in Canadian businesses. Most Eaton VRLA batteries degrade within 3 to 5 years and should be replaced proactively before failing under load.
Our technicians carry OEM-compatible Eaton battery modules and perform all replacements on-site with load testing to confirm runtime after installation.
Eaton & Powerware Models We Service
Eaton 9PX
1 to 22 kVA online double-conversion. Internal battery modules replaced on-site.
- 9PX1500RT, 9PX2200RT, 9PX3000RT
- 9PX6KiRT, 9PX11Ki, 9PX22Ki
- Tower and rack-mount configurations
Eaton 5P & 9SX
750 VA to 3 kVA (5P) and 700 VA to 11 kVA (9SX) line-interactive and online UPS.
- 5P650R, 5P1550iR, 5P3000iR
- 9SX1000R, 9SX3000R, 9SX11Ki
- Same-day service in Montreal, Quebec City, Toronto and Ottawa
Eaton 9130
700 VA to 6 kVA tower and rack-mount. Common in telecom, retail, and small server rooms.
- 9130 1000R, 3000R, 6000R
- OEM-compatible battery modules
Eaton 93PM & BladeUPS
25 to 1500 kVA modular three-phase systems. Battery module hot-swap available.
- Battery module replacement
- String battery inspection
- Runtime recalibration post-install
Powerware 9315
Legacy 10 to 160 kVA three-phase. Legacy battery string replacement.
- Battery string service
- Full compatibility assessment
- Parts sourcing for end-of-life models
Powerware 9395
Legacy 225 to 1200 kVA. Large-scale battery string replacement with full documentation.
- Battery string replacement
- Thermal scan post-install
- Load bank testing available
Signs Your Eaton UPS Battery Needs Replacement
Battery fault or Replace Battery alarm
The UPS is actively reporting battery failure, replacement is urgent.
Reduced runtime on self-test
The UPS cannot deliver full rated runtime during the internal battery self-test.
Battery age over 3 to 5 years
VRLA batteries in Eaton UPS typically reach end of reliable life within 3 to 5 years.
Swollen or leaking battery
Physical battery degradation, an immediate safety concern requiring urgent replacement.
High impedance reading
Elevated internal resistance on battery health test indicates degraded capacity.
How We Replace Your Eaton UPS Battery
Assessment
Confirm your Eaton UPS model, battery module type, and current health readings. We source the correct OEM-compatible battery.
On-site arrival
Technician arrives with the correct battery module or string. For most single-phase models, this is same day in Montreal, Quebec City, Toronto and Ottawa, 24 to 48 h elsewhere.
Controlled replacement
Battery replaced with the UPS on bypass or following Eaton's hot-swap procedure where applicable. Protected load stays online.
Load test
Post-installation load test confirms the UPS delivers rated runtime with the new battery installed.
Eco disposal & report
Old batteries removed and disposed of per Canadian environmental regulations. Written service report provided on completion.
Frequently asked questions
How often should Eaton UPS batteries be replaced?
Most Eaton VRLA batteries reach the end of reliable life within 3 to 5 years at the rated 25 C ambient. Sustained heat above that rating shortens it. Impedance is read on every block at each visit, and replacement is recommended when impedance or runtime results call for it.
Which Eaton battery models do you replace?
OEM-compatible batteries for Eaton 9PX, 9SX, 5P, 9130, 93PM and BladeUPS systems, plus legacy Powerware 9315 and 9395 battery strings.
Can the batteries be replaced while the UPS stays online?
In most cases, yes. The battery is replaced with the UPS on bypass, or following Eaton’s hot-swap procedure where the model supports it, so the protected load stays online. The procedure for your model is confirmed before the visit.
Do you replace one battery block or the whole set?
The whole set. One weak block limits the whole string, so when one block shows high impedance, the blocks are replaced together.
What happens after the new batteries are installed?
A load test confirms the UPS delivers its rated runtime, the old batteries are disposed of under Canadian environmental regulations, and you receive a written service report.
How fast can you replace an Eaton UPS battery?
For most single-phase models, same day in Montreal, Quebec City, Toronto and Ottawa, and 24 to 48 h elsewhere in Canada. Call 1 (438) 800-0382 or email us your model. We reply within 4 business hours with pricing and availability.
Replace Your Eaton UPS Battery Before It Fails
A battery that hasn't been replaced in 3 to 5 years is a silent risk. Request our service today, we respond within 4 business hours with pricing and availability for your Eaton UPS model.
1 (438) 800-0382